zws-baf series 1 zws-baf series 50w to 150w single output power supplies, low cost, worldwide use key market segments & applications factory automation test & measurement light industrial equipment ? universal input (85 - 265vac) ? power factor corrected ? convection cooled ? 5 year warranty ? compact design zws-baf features and benefits features benefits ? convection cooled ? better field reliability ? 5 year warranty ? lower cost of ownership ? power factor corrected ? supports global use specifications models zws50baf zws75baf zws100baf zws150baf items ac input voltage range - 85-265vac (47-63hz) dc input voltage range - 120 - 370vdc input current (typical) (2) a 0.45 / 0.25 1.0 / 0.5 1.3 / 0.65 1.9 / 0.95 inrush current (2) a 14 / 28 25c ambient, cold start power factor (active) - meets en61000-3-2 (typically 0.98/0.93) maximum ripple and noise mv 3.3 & 5v: 120mv, 12 to 24v: 150mv, 48v: 200mv temperature coefficient - <0.02%/c overcurrent protection (1) - >105% of maximum output current hold up time (typ) at 100vac ms 20ms leakage current - 0.5ma max, 0.4ma typ at 230vac remote on / off - optional operating temperature (convection) - -10 to +70c, derate linearly to 50% load from 50 to 70c operating temperature (forced air) - -10 to +70c, derate linearly to 75% load from 60 to 70c storage temperature c -30 to +75c humidity (non condensing) - operating: 30 - 90%rh, storage: 10 - 90%rh withstand voltage - i/p to grnd 2kvac (10ma), i/p to o/p 3kvac (10ma), o/p to grnd 500vac (20ma) for 1 min. isolation resistance - >100m at 25c & 70%rh, output to ground 500vdc vibration (non operating) - 10 - 55hz (1 minute sweep), 19.6m/s 2 constant x, y, z 1 hour shock - < 196.1 m/s 2 safety agency certifications - ul60950-1, csa60950-1, en60950-1, en50178 (ov ii), ce mark conducted & radiated emi - en55011/en55022-b, fcc-b, vcci-b immunity - iec61000-4-2 (lv 2,3), -3 (lv3), -4 (lv 3), 50/75w: -5 (lv4); 100/150w: -5 (lv 3,4), -6 (lv 3), -8 (lv 4), -11 weight (typ) g 165 230 290 390 size (w x h x d) mm 50 x 26 x 132 50 x 33 x 150 62 x 33 x 155 75 x 37 x 160 warranty yrs 5 notes: (1) avoid prolonged operation in overload (2) 100 / 200vac input
zws-baf series 2 model output output adjust max current max output efficiency load reg line reg ovp voltage range (v) (a) power(w) (typ) % (mv) (mv) (v) zws50baf-3 3.3v 2.97-3.63 10 33 79 40 20 3.8-4.95 zws50baf-5 5v 4.5-5.5 10 50 84 40 20 5.75-7 zws50baf-12 12v 10.8-13.2 4.3 51.6 85 96 48 13.8-16.2 zws50baf-15 15v 13.5-16.5 3.5 52.5 86 120 60 17.3-20.3 zws50baf-24 24v 21.6-26.4 2.1 50.4 87 150 96 27.6-32.4 zws50baf-48 48v 43.2-52.8 1.1 52.8 87 240 192 55.2-64.8 zws75baf-3 3.3v 2.97-3.63 15 49.5 79 40 20 3.8-4.95 zws75baf-5 5v 4.5-5.5 15 75 84 40 20 5.75-7 zws75baf-12 12v 10.8-13.2 6.3 75 85 96 48 13.8-16.2 zws75baf-15 15v 13.5-16.5 5 75 86 120 60 17.3-20.3 zws75baf-24 24v 21.6-26.4 3.2 76.8 87 150 96 27.6-32.4 zws75baf-48 48v 43.2-52.8 1.6 76.8 88 240 192 55.2-64.8 zws100baf-3 3.3v 2.97-3.63 20 66 84 40 20 3.79-4.95 zws100baf-5 5v 4.5-5.5 20 100 86 40 20 5.75-7 ZWS100BAF-12 12v 10.8-13.2 8.5 102 88 96 48 13.8-16.2 zws100baf-15 15v 13.5-16.5 6.7 100.5 88 120 60 17.3-20.3 zws100baf-24 24v 21.6-26.4 4.3 103.2 89 150 96 27.6-32.4 zws100baf-48 48v 39.5-52.8 2.1 100.8 90 240 192 55.2-64.8 zws150baf-3 3.3v 2.97-3.63 30 99 84 40 20 3.79-4.95 zws150baf-5 5v 4.5-5.5 30 150 87 40 20 5.75-7 zws150baf-12 12v 10.8-13.2 12.5 150 88 96 48 13.8-16.2 zws150baf-15 15v 13.5-16.5 10 150 89 120 60 17.3-20.3 zws150baf-24 24v 21.6-26.4 6.3 151.2 90 150 96 27.6-32.4 zws150baf-48 48v 39.5-52.8 3.2 153.6 91 240 192 55.2-64.8 m o d e l s e l e c t o r 5 v 10 a 100-240vac z w s5 0b af -5 output 50 / 60h z input made in japan 0.67 a outline drawing zws50baf note: zws50 & 75 available q1 2011 notes: a: 4 - 3.5mm ? holes are for customers chassis mounting holes. all must be screwed in order to conform the vibration specification. b: model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications. c: country of manufacture will be shown here. d: is for safety ground connection. e: to keep the distance more than 4mm between pcb edge and customers chassis.
zws-baf series 3 made in japan zws75baf-5 input 50/60hz output 100-240vac 5 v 15 a 1.0 a outline drawing zws75baf notes: a: 4 - 3.5mm ? holes are for customers chassis mounting holes. all must be screwed in order to conform the vibration specification. b: model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications. c: country of manufacture will be shown here. d: is for safety ground connection. e: to keep the distance more than 4mm between pcb edge and customers chassis. outline drawing zws100baf notes: a: 4 - 3.5mm ? holes are for customers chassis mounting holes. all must be screwed in order to conform the vibration specification. b: model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications. c: country of manufacture will be shown here. d: is for safety ground connection. e: to keep the distance more than 4mm between pcb edge and customers chassis. f: remote on/off control connector (cn52): b2b-xh-am (j.s.t.) option matching housing: xhp-2 (j.s.t.). matching terminal: bxh-001t- p0.6 (j.s.t.) or sxh-001t-p0.6 (j.s.t.) hand crimping tool: yc-110r (j.s.t.) or yrs-110 (j.s.t.) matching housing & terminal --- not included with the product. outline drawing zws150baf notes: a: 4 - 3.5mm ? holes are for customers chassis mounting holes. all must be screwed in order to conform the vibration specification. b: model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications. c: country of manufacture will be shown here. d: is for safety ground connection. e: to keep the distance more than 4mm between pcb edge and customers chassis. f: remote on/off control connector (cn52): b2b-xh-am (j.s.t.) option matching housing: xhp-2 (j.s.t.). matching terminal: bxh-001t- p0.6 (j.s.t.) or sxh-001t-p0.6 (j.s.t.) hand crimping tool: yc-110r (j.s.t.) or yrs-110 (j.s.t.) matching housing & terminal --- not included with the product.
zws-baf series zws-baf june11 v3 4 local distribution tdk-lambda emea www.emea.tdk-lambda.com tdk-lambda france sas route de grivery zac des delaches cs 41077 91978 courtaboeuf cedex france tel: +33 1 60 12 71 65 fax: +33 1 60 12 71 66 france@fr.tdk-lambda.com www.fr.tdk-lambda.com italy sales office via dei lavoratori 128/130 20092 cinisello balsamo (mi) italy tel: +39 02 61 29 38 63 fax: +39 02 61 29 09 00 info.italia@it.tdk-lambda.com www.it.tdk-lambda.com tdk-lambda germany gmbh karl-bold-strasse 40 77855 achern germany tel: +49 7841 666 0 fax: +49 7841 5000 info.germany@de.tdk-lambda.com www.de.tdk-lambda.com austria sales office aredstrasse 22 2544 leobersdorf austria tel: +43 2256 655 84 fax: +43 2256 645 12 info.germany@de.tdk-lambda.com www.de.tdk-lambda.com tdk-lambda uk ltd. kingsley avenue ilfracombe devon ex34 8es united kingdom tel: +44 (0) 12 71 85 66 66 fax: +44 (0) 12 71 86 48 94 powersolutions@uk.tdk-lambda.com www.uk.tdk-lambda.com nemic lambda ltd. kibbutz givat hashlosha 48800 israel tel: +9 723 902 4333 fax: +9 723 902 4777 info@nemic.co.il www.nemic.co.il russia technical support: st petersburg tel: +7 (812) 6580463 sales: moscow tel: +7 (499) 7557732 info@tdk-lambda.ru www.tdk-lambda.ru distribution: rsg electronic components gmbh sprendlinger landstr. 115 d-63069 offenbach / germany tel. +49.69.984047-0 fax +49.69.984047-77 info@rsg-electronic.de www.rsg-electronic.de ?nderungen vorbehalten / subject to change without notice.
|